Vacuum Manifolds

Vacuum manifolds are used to draw liquid through a filter or SPE plate into either a waste tray or a collection plate. The application of vacuum increases the speed at which samples can be collected.


MicroLute™ manifold

The MicroLute™ vacuum manifold from Porvair Sciences is precision machined from crystal clear acrylic (top plate) and acetal polymer (plenum chamber). The acrylic top plate allows visual access to the plenum chamber for checking progress of the separation process.

  • Designed to take most filter plates manufactured to the SBS/ANSI specification with long drip directors
  • Also designed so that SPE plates can be used, especially the Porvair Sciences MicroLute™ plate
  • Fitted with valve controller to ensure accurate adjustments of vacuum to the manifold
  • On/off valve for speed of use
  • Square well collection plate volumes of 350µl, 1ml and 2ml may be used. Any plate up to 44mm in height can be used
  • Fitted with a custom O-ring in upper surface allowing airtight interface between plates during operation
  • Removable top plate to install reservoir tray or collection plate
  • Chamber has a medium resistance to alcohols and weak acids


Universal robotic manifold

Based on our successful MicroLute™ Acrylic Manifold, the new Universal Robotic Manifold is designed to be easily assembled and disassembled by robotic manipulators, thus enabling productive automation of SPE or DNA clean-up procedures. Able to accommodate collection plates from 14mm - 44mm in height and adaptable for working with short, medium and long skirts and drip directors, the Universal Robotic Manifold can operate with many different brands of filter plate and collection trays. Supplied with an integral vacuum gauge, the Manifold provides complete control of vacuum pressure ensuring plates are processed with high reproducibility. The Manifold is fully compatible with most commercial robotic liquid handling systems.

The Universal Robotic Manifold is suitable for a range of manufacturer’s plates without an adaptor. For certain plate types a Shallow Adaptor or a Deep Adaptor, is required. 

  • Compatible with any filter plate type
  • Robotic friendly designs aids automation
  • Chemically resistant acetal/acrylic construction
  • Adaptable for different collection plates
  • Easy visual inspection of process
  • Built in vacuum gauge for reproducibility
Product Description
Detail
Disposable Reservoir Tray
Product code: 219010
Replacement gasket, profile (to fit between top plate and vacuum chamber), for 228005/228008/228020
Product code: 228007
Acrylic vacuum manifold to hold deepwell capture plates
Product code: 228008
Replacement gasket, flat (to fit top plate below Microlute), for 228008/228020
Product code: 228009
Spacer Insert, Polypropylene, 1ml, to allow use of round well Polypropylene microplates (219002) in Acrylic and Aluminium deep well manifold (228008, 228005, 228020)
Product code: 228010
Spacer Insert, HDPE, 350µl, to allow use of 350µl Microplates in Acrylic manifolds (228008/228020)
Product code: 228012
Robotic Compatible Universal vacuum Manifold, acrylic, c/w gauge
Product code: 228020
Adaptor 1 for medium skirt / drip plates (for use with 228020)
Product code: 228021
Adaptor 2 for short skirt / long drip plates (for use with 228020)
Product code: 228022
Get in contact

Not sure which product is right for you?

Contact us